3com S7906E 설치 설명서

1-28

Figure 1-5 Network diagram for static port configuration

Source

1::1/64

Router A

MLD querier

GE2/0/1
2001::1/64

GE2/0/2

1::2/64

Switch A

Switch C

Switch B

GE2/0/1

GE2/0/2

Host C

Host B

Host A

Receiver

GE2/0/5

Configuration procedure

1) Enable IPv6 forwarding and configure IPv6 addresses

Enable IPv6 forwarding and configure an IPv6 address and prefix length for each interface as per

2) Configure Router A

# Enable IPv6 multicast routing, enable IPv6 PIM-DM on each interface, and enable MLD on

GigabitEthernet 2/0/1.

<RouterA> system-view

[RouterA] multicast ipv6 routing-enable

[RouterA] interface gigabitethernet 2/0/1

[RouterA-GigabitEthernet2/0/1] mld enable

[RouterA-GigabitEthernet2/0/1] pim ipv6 dm

[RouterA-GigabitEthernet2/0/1] quit

[RouterA] interface gigabitethernet 2/0/2

[RouterA-GigabitEthernet2/0/2] pim ipv6 dm

[RouterA-GigabitEthernet2/0/2] quit

3) Configure Switch A

# Enable MLD snooping globally.

<SwitchA> system-view

[SwitchA] mld-snooping

[SwitchA-mld-snooping] quit

# Create VLAN 100, assign GigabitEthernet 2/0/1 through GigabitEthernet 2/0/3 to this VLAN, and

enable MLD snooping in the VLAN.

[SwitchA] vlan 100

[SwitchA-vlan100] port gigabitethernet 2/0/1 to gigabitethernet 2/0/3

[SwitchA-vlan100] mld-snooping enable

[SwitchA-vlan100] quit