3com S7906E 설치 설명서

 

1-36 

Although an IPv6 multicast group policy has been configured to allow hosts to join specific IPv6 

multicast groups, the hosts can still receive IPv6 multicast data addressed to other groups.  

z 

The IPv6 ACL rule is incorrectly configured.  

z 

The IPv6 multicast group policy is not correctly applied.  

z 

The function of dropping unknown IPv6 multicast data is not enabled, so unknown IPv6 multicast 

data is flooded. 

1) Use 

the 

display acl ipv6 command to check the configured IPv6 ACL rule. Make sure that the IPv6 

ACL rule conforms to the IPv6 multicast group policy to be implemented.  

2) Use 

the 

display this command in MLD snooping view or the corresponding interface view to check 

whether the correct IPv6 multicast group policy has been applied. If not, use the group-policy or 

mld-snooping group-policy command to apply the correct IPv6 multicast group policy.  

3) Use 

the 

display current-configuration command to check whether the function of dropping 

unknown IPv6 multicast data is enabled. If not, use the drop-unknown or mld-snooping 

drop-unknown command to enable the function of dropping unknown IPv6 multicast data.