3com S7906E 설치 설명서

 

1-39 

Follow these steps to configure a routing policy for inter-provider VPN option C on an ASBR PE: 

Enter system view 

— 

Enter routing policy view 

route-policy policy-name 
permit node seq-number 

Required 

Configure the device to match 
IPv4 routes with labels 

Required 

Configure the device to assign 
labels to IPv4 routes 

Required 

By default, an IPv4 route does 
not carry any label. 

 

For information about routing policy configuration, refer to Routing Policy Configuration in the IP 

Routing Volume. 

 

For a network with many VPNs, if you want to implement layered management of VPNs and to conceal 

the deployment of internal VPNs, nested VPN is a good solution. By using nested VPN, you can 

implement layered management of internal VPNs easily with a low cost and simple management 

operation. 

Before configuring nested VPN, configure the basic MPLS L3VPN capability. Refer to 

Follow these steps to configure nested VPN: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter BGP VPN instance view 

ipv4-family vpn-instance 
vpn-instance-name 

— 

Configure a CE peer or peer 
group 

peer { group-name | 
peer-address } as-number 
number  

Required 

Return to BGP view 

— 

Enter BGP-VPNv4 subaddress 
family view 

—