3com S7906E 설치 설명서

 

2-3 

Figure 2-1 Network diagram for super-VLAN configuration 

 

 

# Create VLAN 10, and configure its VLAN interface IP address as 10.0.0.1/24. 

<Sysname> system-view 

[Sysname] vlan 10 

[Sysname-vlan10] interface vlan-interface 10 

[Sysname-Vlan-interface10] ip address 10.0.0.1 255.255.255.0 

# Enable local proxy ARP. 

[Sysname-Vlan-interface10] local-proxy-arp enable 

[Sysname-Vlan-interface10] quit 

# Create VLAN 2, and assign GigabitEthernet 2/0/1 and GigabitEthernet 2/0/2 to it. 

[Sysname] vlan 2 

[Sysname-vlan2] port gigabitethernet 2/0/1 gigabitethernet 2/0/2 

# Create VLAN 3, and assign GigabitEthernet 2/0/3 and GigabitEthernet 2/0/4 to it. 

[Sysname-vlan2] quit 

[Sysname] vlan 3 

[Sysname-vlan3] port gigabitethernet 2/0/3 gigabitethernet 2/0/4 

# Create VLAN 5, and assign GigabitEthernet 2/0/5 and GigabitEthernet 2/0/6 to it. 

[Sysname-vlan3] quit 

[Sysname] vlan 5 

[Sysname-vlan5] port gigabitethernet 2/0/5 gigabitethernet 2/0/6 

# Configure VLAN 10 as the super VLAN, and configure VLAN 2, VLAN 3, and VLAN 5 as its 

sub-VLANs. 

[Sysname-vlan5] quit 

[Sysname] vlan 10 

[Sysname-vlan10] supervlan 

[Sysname-vlan10] subvlan 2 3 5 

[Sysname-vlan10] quit 

[Sysname] quit 

# Display information about VLAN 10, the super VLAN, to verify the above configuration.  

<Sysname> display supervlan