3com S7906E 설치 설명서

 

1-51 

Username:test@bbb 

Password: 

<Switch> ? 

User view commands: 

  cluster  Run cluster command 

  display  Display current system information 

  ping     Ping function 

  quit     Exit from current command view 

  ssh2     Establish a secure shell client connection 

  super    Set the current user priority level 

  telnet   Establish one TELNET connection 

  tracert  Trace route function 

When switching to user privilege level 3, the Telnet user only needs to enter password enabpass as 

prompted.   

<Switch> super 3 

 Password: 

User privilege level is 3, and only those commands can be used 

whose level is equal or less than this. 

Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE 

# If the HWTACACS server is not available, the Telnet user needs to enter password 654321 as 

prompted for local privilege level switching authentication.  

<Switch> super 3 

 Password: 

Å Enter the password for HWTACACS privilege level switching authentication  

 Error: Invalid configuration or no response from the authentication server. 

 Info: Change authentication mode to local. 

 Password: 

Å Enter the password for local privilege level switching authentication 

User privilege level is 3, and only those commands can be used 

whose level is equal or less than this. 

Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE 

Symptom 1: User authentication/authorization always fails. 

1)  A communication failure exists between the NAS and the RADIUS server. 

2)  The username is not in the format of userid@isp-name or no default ISP domain is specified for the 

NAS. 

3)  The user is not configured on the RADIUS server. 

4)  The password of the user is incorrect. 

5)  The RADIUS server and the NAS are configured with different shared key. 

Check that: 

1)  The NAS and the RADIUS server can ping each other.