3com S7906E 설치 설명서

다운로드
페이지 2621
 
1-13 
To do… 
Use the command… 
Remarks 
Display portal server statistics 
on a specified interface or all 
interfaces 
display portal server 
statistics
 { all | interface 
interface-type 
interface-number
 } 
Available in any view 
Display TCP spoofing statistics 
display portal tcp-cheat 
statistics 
Available in any view 
Display information about 
portal users on a specified 
interface or all interfaces 
display portal user {  all | 
interface 
interface-type 
interface-number } 
Available in any view 
Clear portal connection 
statistics on a specified 
interface or all interfaces 
reset portal connection 
statistics 
{all | interface 
interface-type 
interface-number
 } 
Available in user view 
Clear portal server statistics on 
a specified interface or all 
interfaces 
reset portal server statistics 
{  all | interface  interface-type 
interface-number
 } 
Available in user view 
Clear TCP spoofing statistics 
reset portal tcp-cheat 
statistics 
Available in user view 
 
Portal Configuration Examples 
Configuring Direct Portal Authentication 
Network requirements 
The host is directly connected to the switch and the switch is configured for direct authentication. 
The host is assigned with a public network IP address manually or automatically by a DHCP server. 
Before portal authentication, users using the host can access only the portal server. After passing 
portal authentication, they can access unrestricted Internet resources.  
A RADIUS server serves as the authentication/accounting server. 
Figure 1-4 Configure direct portal authentication 
RADIUS server
Switch
Host
2.2.2.2/24
Gateway:2.2.2.1/24
Vlan-int100
2.2.2.1/24
Vlan-int2
192.168.0.100/24
Portal server
192.168.0.111/24
192.168.0.112/24
 
 
Configuration procedure