3com S7906E 설치 설명서

 

1-22 

Configure the interface to be 
tracked 

vrrp ipv6 vrid virtual-router-id 
track interface interface-type 
interface-number [ reduced 
priority-reduced ] 

Optional 

No interface is being tracked by 
default. 

Configure VRRP to track a 
specified Track object 

vrrp ipv6 vrid virtual-router-id 
track track-entry-number 
[ reduced priority-reduced | 
switchover ] 

Optional 

Not configured by default. 

 

 

z 

The running priority of an IP address owner is always 255 and you do not need to configure it. An IP 

address owner always works in the preemptive mode. 

z 

Interface tracking is not configurable on an IP address owner. 

z 

If the state of the interface under tracking changes from down or removed to up, the priority of the 

router corresponding to the interface is restored automatically. 

z 

If the state of a Track object changes from negative or invalid to positive, the priority of the router 

corresponding to the Track object is restored automatically. 

 

Before configuring the VF tracking function, create a VRRP group and configure a virtual IPv6 address 

for it. 

VRRP works in load balancing mode. Suppose that the VF is configured to monitor the Track object. 

When the state of the Track object becomes negative or invalid, the weight values of all VFs on the 

routers decrease by a specified value; when the state of the Track object becomes positive, the weight 

values of all VFs on the routers restore their original values. 

Follow these steps to configure VF tracking: 

Enter system view 

system-view 

— 

Enter the specified interface 
view 

interface interface-type 
interface-number 

— 

Configure the VF to monitor a 
specified Track object 

vrrp ipv6 vrid virtual-router-id 
weight track 
track-entry-number [ reduced 
weight-reduced ] 

Required 

No Track object is specified by 
default.