3com S7906E 설치 설명서
2-1
2
Logging In Through the Console Port
When logging in through the Console port, go to these sections for information you are interested in:
z
z
z
z
z
z
z
z
Introduction
To log in through the Console port is the most common way to log in to a switch. It is also the
prerequisite to configure other login methods. By default, you can log in to an 3Com S7900E series
Ethernet switch through its Console port only.
To log in to an Ethernet switch through its Console port, the related configuration of the user terminal
must be in accordance with that of the Console port.
lists the default settings of a Console port.
Table 2-1 The default settings of a Console port
Setting
Default
Baud rate
9,600 bps
Flow control
Off
Check mode
No check bit
Stop bits
1
Data bits
8
After logging in to a switch, you can perform configuration for AUX users. Refer to
for details.
Setting Up the Connection to the Console Port
z
Connect the serial port of your PC/terminal to the Console port of the switch, as shown in
.