3com S7906E 설치 설명서

 

2-13 

Command accounting allows the HWTACACS server to record all commands executed on the device 

regardless of the command execution result. This helps control and monitor the user operations on the 

device.  

If command accounting is enabled and command authorization is not enabled, every executed 

command will be recorded on the HWTACACS server. If both command accounting and command 

authorization are enabled, only the authorized and executed commands will be recorded on the 

HWTACACS server. 

The command accounting configuration involves two steps: 

1)  Enable command accounting. See the following table for details. 

2)  Configure a command accounting scheme. Specify the IP address and other related parameters 

for the accounting server. For details, refer to the AAA Configuration in the Security Volume.  

Follow these steps to enable command accounting: 

Enter system view 

system-view 

–– 

Enter AUX user interface view 

user-interface aux 
first-number [ last-number ] 

–– 

Enable command accounting 

Required 

Disabled by default, that is, the 
accounting server does not 
record the commands the users 
execute.