3com S7906E 설치 설명서

 

8-4 

Figure 8-1 Network diagram for controlling Telnet users using ACLs 

Switch

10.110.100.46

Host A

IP network

Host B

10.110.100.52

 

 

# Define a basic ACL. 

<Sysname> system-view 

[Sysname] acl number 2000 match-order config 

[Sysname-acl-basic-2000] rule 1 permit source 10.110.100.52 0 

[Sysname-acl-basic-2000] rule 2 permit source 10.110.100.46 0 

[Sysname-acl-basic-2000] rule 3 deny source any 

[Sysname-acl-basic-2000] quit 

# Apply the ACL. 

[Sysname] user-interface vty 0 4 

[Sysname-ui-vty0-4] acl 2000 inbound 

You can manage a 3Com S7900E series Ethernet switch through network management software. 

Network management users can access switches through SNMP. 

You need to perform the following two operations to control network management users by source IP 

addresses. 

z 

Defining an ACL 

z 

Applying the ACL to control users accessing the switch through SNMP 

The controlling policy against network management users is determined, including the source IP 

addresses to be controlled and the controlling actions (permitting or denying). 

Follow these steps to control network management users by source IP addresses: 

Enter system view 

—