3com S7906E 설치 설명서

 

1-20 

  <1-4094>  VLAN interface number 

[Sysname] interface vlan-interface 1 ? 

  <cr> 

[Sysname] interface vlan-interface 1 

Where, <cr> indicates that there is no parameter at this position. The command is then repeated in the 

next command line and executed if you press Enter. 

4)  Enter a character string followed by a ?. All the commands starting with this string are displayed. 

<Sysname> c? 

   cd 

   clock 

   cluster 

   copy 

5)  Enter a command followed by a character string and a ?. All the keywords starting with this string 

are listed. 

<Sysname> display cl? 

   clipboard 

   clock 

   cluster 

6) Press 

Tab after entering the first several letters of a keyword to display the complete keyword, 

provided these letters can uniquely identify the keyword in this command. If several matches are 

found, the complete keyword which is matched first is displayed (the matching rule is: the letters 

next to the input letters are arranged in alphabetic order, and the letter in the first place is matched 

first.). If you repeatedly press Tab, all the keywords starting with the letter that you enter are 

displayed in cycles, and you can select the keywords needed. 

Synchronous information output refers to the feature that if the user’s input is interrupted by system 

output, then after the completion of system output the system will display a command line prompt and 

your input so far, and you can continue your operations from where you were stopped. 

You can use the info-center synchronous command to enable synchronous information output. For 

the detailed description of this function, refer to Information Center Configuration in the System Volume. 

Adding the keyword undo can form an undo command. Almost every configuration command has an 

undo form. undo commands are generally used to restore the system default, disable a function or 

cancel a configuration. For example, the info-center enable command is used to enable the 

information center, while the undo info-center enable command is used to disable the information 

center. (By default, the information center is enabled.) 

The CLI provides the basic command editing functions and supports multi-line editing. When you 

execute a command, the system automatically goes to the next line if the maximum length of the 

command is reached. You cannot press Enter to go to the next line; otherwise, the system will 

automatically execute the command. The maximum length of each command is 510 characters. 

 lists these functions.