3com S7906E 설치 설명서

 

2-6 

Before the current running configuration is saved manually or automatically, the file path and filename 

prefix must be configured. After that, the system saves the current running configuration with the 

specified filename (filename prefix_serial number.cfg) to the specified path. The filename of a saved 

configuration file is like 20080620archive_1.cfg, or 20080620archive_2.cfg. The saved configuration 

files are numbered automatically, from 1 to 1,000 (with increment of 1). If the serial number reaches 

1,000, it restarts from 1. If you change the path or filename prefix, or reboot the device, the saved file 

serial number restarts from 1, and the system recounts the saved configuration files. If you change the 

path of the saved configuration files, the files in the original path become common configuration files, 

and are not processed as saved configuration files. 

The number of saved configuration files has an upper limit. After the maximum number of files is saved, 

the system deletes the oldest files when the next configuration file is saved. 

Follow these steps to configure parameters for saving the current running configuration: 

Enter system view 

— 

Configure the path and 
filename prefix of a saved 
configuration file 

archive configuration 
location directory 
filename-prefix 
filename-prefix 

Required 

By default, the path and 
filename of the saved 
configuration file are not 
configured, and the system 
does not save the configuration 
file at a specified interval. 

Set the maximum number of 
configuration files that can be 
saved 

archive configuration max 
file-number 

Optional 

The default number is 5.