3com S7906E 설치 설명서
2-9
Do not unplug and plug a card during configuration rollback (that is, the system is executing the
configuration replace file command). In addition, configuration rollback may fail if one of the following
situations is present (if a command cannot be rolled back, the system skips it and processes the next
one):
z
The complete undo form of a command is not supported, namely, you cannot get the actual undo
form of the command by simply putting the keyword undo in front of the command, so the complete
undo form of the command cannot be recognized by the device.
z
The configuration cannot be removed, such as hardware-related commands
z
Commands in different views are dependent on each other
z
If the replacement configuration file is not a complete file generated by using the save or archive
configuration command, or the file is copied from a different type of device, the configuration
cannot be rolled back. Ensure that the replacement configuration file is correct and compatible with
the current device.
Specifying a Startup Configuration File for the Next System Startup
A startup configuration file is the configuration file to be used at the next system startup. You can specify
a configuration file as the startup configuration file to be used at the next system startup in the following
two ways:
z
Use the save command. If you save the current configuration to the specified configuration file in
the interactive mode, the system automatically sets the file as the configuration file to be used at
the next system startup (for a device supporting main/backup startup configuration file, the system
sets the file as the main startup configuration file to be used at the next system startup).
z
Use the command dedicated to specify a startup configuration file, which is described in the
following table:
Follow the step below to specify a configuration file as the startup configuration file for the next system
startup (distributed device):
To do…
Use the command…
Remarks
Specify a startup configuration
file for the next system startup
file for the next system startup
startup saved-configuration
cfgfile
cfgfile
Required
Available in user view
Follow the step below to specify a configuration file as the startup configuration file for the next system
startup (distributed IRF device):
To do…
Use the command…
Remarks
Specify a startup configuration
file for the next system startup
of all the main boards of a IRF
file for the next system startup
of all the main boards of a IRF
startup saved-configuration
cfgfile
cfgfile
Required
Available in user view.