3com S7906E 설치 설명서
1-7
z
If the timestamp starts with a *, the information is debugging information
source
This field indicates the source of the information, such as the slot number of a board, IRF member ID,
IRF member ID and slot number, or the source IP address of the log sender. This field is optional and is
displayed only when the output destination is the log host.
content
This field provides the content of the system information.
Configuring Information Center
Information Center Configuration Task List
Complete the following tasks to configure information center:
Task
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Outputting System Information to the Console
Outputting system information to the console
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
specified channel number
info-center channel
channel-number name
channel-name
channel-number name
channel-name
Optional
Refer to
channel names.
Configure the channel through
which system information can
be output to the console
which system information can
be output to the console
info-center console channel
{ channel-number |
channel-name }
{ channel-number |
channel-name }
Optional
By default, system information
is output to the console through
channel 0 (known as console).
is output to the console through
channel 0 (known as console).