3com S7906E 설치 설명서
1-10
To do…
Use the command…
Remarks
Specify a log host and
configure the parameters when
system information is output to
the log host
configure the parameters when
system information is output to
the log host
info-center loghost host-ip
[ port port-number ] [ channel
{ channel-number |
channel-name } | facility
local-number ] *
[ port port-number ] [ channel
{ channel-number |
channel-name } | facility
local-number ] *
Required
By default, the system does not
output information to a log host.
If you specify to output system
information to a log host, the
system uses channel 2
(loghost) by default.
output information to a log host.
If you specify to output system
information to a log host, the
system uses channel 2
(loghost) by default.
The value of the port-number
argument should be the same
as the value configured on the
log host, otherwise, the log host
cannot receive system
information.
argument should be the same
as the value configured on the
log host, otherwise, the log host
cannot receive system
information.
Configure the output rules of
the system information
the system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
Optional
Refer to
.
Specify the source IP address
for the log information
for the log information
info-center loghost source
interface-type interface-number
interface-type interface-number
Optional
By default, the source interface
is determined by the matched
route, and the primary IP
address of this interface is the
source IP address of the log
information.
is determined by the matched
route, and the primary IP
address of this interface is the
source IP address of the log
information.
Configure the format of the time
stamp for system information
output to the log host
stamp for system information
output to the log host
info-center timestamp
loghost { date | no-year-date |
none }
loghost { date | no-year-date |
none }
Optional
date by default.
Outputting System Information to the Trap Buffer
The trap buffer receives the trap information only, and discards the log and debugging information even
if you have configured to output them to the trap buffer.
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
specified channel number
info-center channel
channel-number name
channel-name
channel-number name
channel-name
Optional
Refer to
channel names.