3com S7906E 설치 설명서

 

1-15 

Display the state information of the 
PoE power supply 

Display the state information of the 
PoE power supply (distributed IRF 
device) 

display poe-power status 
[ chassis chassis-number ] 

Display the information of the 
monitoring module of the PoE power 
supply 

Display the information of the 
monitoring module of the PoE power 
supply (distributed IRF device) 

display poe-power 
supervision-module [ chassis 
chassis-number ] 

Display the switch information of the 
PoE power supply 

Display the switch information of the 
PoE power supply (distributed IRF 
device) 

display poe-power switch state 
[ chassis chassis-number ] 

Display all information of the 
configurations and applications of the 
PoE profile 

display poe-profile [ index 
index | name profile-name ] 

Display all information of the 
configurations and applications of the 
PoE profile applied to the specified 
PoE interface 

display poe-profile interface 
interface-type interface-number 

 

As shown in 

z 

The device is equipped with two PoE-supporting cards, which are inserted in Slot 3 and Slot 5 

respectively. The PSE IDs are 4 and 6. 

z 

Allocate 400 watts to PSE 4, provided the default maximum power to PSE in PSE 6 can meet the 

requirements. 

z 

GigabitEthernet 3/0/1 and GigabitEthernet 3/0/2 are connected to IP telephones. 

z 

GigabitEthernet 5/0/1 and GigabitEthernet 5/0/2 are connected to AP devices. 

z 

The power supply priority of GigabitEthernet 3/0/2 is critical. When a new PD results in PSE power 

overload, the PSE does not supply power to the new PD according to the default PoE interface 

power management priority policy. 

z 

The power of the AP device connected to GigabitEthernet 5/0/2 does not exceed 9000 milliwatts.