3com S7906E 설치 설명서

 

1-21 

Enter system view 

system-view 

— 

Enter NQA test group view 

nqa entry admin-name 
operation-tag 

— 

Enter test type view of the test 
group 

type { dlsw | dns | ftp | http | 
icmp-echo | snmp | tcp | 
udp-echo | udp-jitter | voice }

— 

Configure the interval for 
collecting the statistics of the 
test results 

statistics interval interval 

Optional 

60 minutes by default. 

Configure the maximum 
number of statistics groups that 
can be kept 

statistics max-group number 

Optional 

2 by default. 

If the maximum number is 0, it 
indicates that no statistics is 
performed. 

Configure the hold time of a 
statistics group 

statistics hold-time hold-time

Optional 

120 minutes by default. 

 

z 

The NQA statistics function is not supported in a DHCP test. 

z 

If you specify the interval argument in the frequency interval command as 0, no statistics group 

information is generated. 

 

With the history records saving function enabled, the system will save the history records of the NQA 

test. You can view the history records of a test group using the display nqa history command. 

The configuration task also allows you to configure: 

z 

Lifetime of the history records: The records are removed when the lifetime is reached. 

z 

The maximum number of history records that can be saved in a test group: If the number of history 

records in a test group exceeds the maximum number, the earliest history records will be removed. 

Follow these steps to configure the history records saving function of an NQA test group: 

Enter system view 

— 

Enter NQA test group 
view 

nqa entry admin-name operation-tag 

— 

Enter NQA test type view 

type { dhcp | dlsw | dns | ftp | http | 
icmp-echo | snmp | tcp | udp-echo | 
udp-jitter | voice } 

— 

Enable the saving of the 
history records of the 
NQA test group 

Required 

By default, history records of 
the NQA test group are not 
saved.