3com S7906E 설치 설명서

 

1-36 

Configuration procedure 

1)  Configure Device B 

# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 8000. 

<DeviceB> system-view 

[DeviceB] nqa server enable 

[DeviceB] nqa server udp-echo 10.2.2.2 8000 

# Enable the saving of history records. 

[DeviceA-nqa-admin-test-udp-echo] history-record enable 

2)  Configure Device A 

# Create a UDP echo test group and configure related test parameters. 

<DeviceA> system-view 

[DeviceA] nqa entry admin test

 

[DeviceA-nqa-admin-test] type udp-echo 

[DeviceA-nqa-admin-test-udp-echo] destination ip 10.2.2.2

 

[DeviceA-nqa-admin-test-udp-echo] destination port 8000 

# Enable the saving of history records. 

[DeviceA-nqa-admin-test-udp-echo] history-record enable 

[DeviceA-nqa-admin-test-icmp-echo] history-record number 10 

[DeviceA-nqa-admin-test-udp-echo] quit 

# Enable UDP echo test. 

[DeviceA] nqa schedule admin test start-time now lifetime forever 

# Disable UDP echo test after the test begins for a period of time. 

[DeviceA] undo nqa schedule admin test 

# Display results of the last UDP echo test. 

[DeviceA] display nqa result admin test

 

  NQA entry(admin admin, tag test) test results: 

    Destination IP address: 10.2.2.2

 

      Send operation times: 1              Receive response times: 1 

      Min/Max/Average round trip time: 25/25/25 

      Square-Sum of round trip time: 625 

      Last succeeded probe time: 2007-11-22 10:36:17.9 

    Extended results: 

      Packet lost in test: 0% 

      Failures due to timeout: 0 

      Failures due to disconnect: 0 

      Failures due to no connection: 0 

      Failures due to sequence error: 0 

      Failures due to internal error: 0 

      Failures due to other errors: 0 

      Packet(s) arrived late: 0

 

# Display the history of UDP echo tests. 

[DeviceA] display nqa history admin test 

  NQA entry(admin admin, tag test) history record(s):