3com S7906E 설치 설명서

 

1-2 

An ACSEI server can register multiple ACSEI clients. The maximum number of ACSEI clients that an 

ACSEI server allows to register is 10. 

An ACSEI server uses two timers, the clock synchronization timer and the monitoring timer. 

z 

The clock synchronization timer is used to periodically trigger the ACSEI server to send clock 

synchronization advertisements to ACSEI clients. You can set this timer through command lines. 

z 

The monitoring timer is used to periodically trigger the ACSEI server to send monitoring requests to 

ACSEI clients. You can set this timer through command lines. 

An ACSEI client starts two timers, the registration timer and the monitoring timer. 

z 

The registration timer is used to periodically trigger the ACSEI client to multicast registration 

requests (with the multicast MAC address being 

010F

-

E200

-

0021

). You cannot set this timer. 

z 

The monitoring timer is used to periodically trigger the ACSEI client to send monitoring requests to 

the ACSEI server. You cannot set this timer. 

ACSEI starts up and runs in the following procedures: 

1)  Run the ACSEI client application to enable ACSEI client. 

2)  Start up the device and enable the ACSEI server function on it. 

3)  The ACSEI client multicasts registration requests. 

4)  After the ACSEI server receives a valid registration request, it negotiates parameters with the 

ACSEI client and establishes connection with the client if the negotiation succeeds. 

5)  The ACSEI server and the ACSEI client mutually monitor the connection. 

6)  If detecting the disconnection of the ACSEI client, the ACFP server will remove the configuration 

and policies associated with the client. 

The section covers these topics: 

z 

Enabling ACSEI Server 

z 

z 

Configuring the Monitoring Timer 

z 

z 

z 

Follow these steps to enable ACSEI server: 

Enter system view 

system-view — 

Enable ACSEI server 

acsei server enable 

Required 

Disabled by default.