3com S7906E 설치 설명서

 

1-4 

Log in to the remote FTP server 
directly in user view 

ftp [ server-address [ service-port ] 
[ source { interface interface-type 
interface-number | ip 
source-ip-address } ] ] 

Log in to the remote FTP server 
indirectly in FTP client view 

open server-address [ service-port ]

Use either approach. 

The ftp command is 
available in user view; and 
the open command is 
available in FTP client 
view. 

 

z 

If no primary IP address is configured on the specified source interface, no FTP connection can be 

established. 

z 

If you use the ftp client source command to first configure the source interface and then the 

source IP address of the transmitted packets, the newly configured source IP address will take 

effect instead of the current source interface, and vice versa. 

 

Follow these steps to establish an FTP connection (In IPv6 networking): 

Log in to the remote FTP server 
directly in user view 

ftp ipv6 [ server-address 
[ service-port ] [ source ipv6 
source-ipv6-address ] [ -i 
interface-type 
interface-number ] ] 

Log in to the remote FTP server 
indirectly in FTP client view 

open ipv6 server-address 
[ service-port ] [ -i interface-type 
interface-number ] 

Use either approach. 

The ftp ipv6 command is 
available in user view; and the 
open ipv6 command is 
available in FTP client view. 

 

After the device serving as the FTP client has established a connection with an FTP server (For how to 

establish an FTP connection, refer to 

.), you can create or delete 

folders under the authorized directory of the FTP server. 

Follow these steps to operate the directories on an FTP server: 

Display detailed information about a directory 
or file on the remote FTP server 

dir [ remotefile [ localfile ] ] 

Optional 

Query a directory or file on the remote FTP 
server 

ls [ remotefile [ localfile ] ] 

Optional 

Change the working directory of the remote 
FTP server 

cd { directory | .. | / } 

Optional