3com S7906E 설치 설명서

1-7

If neither global nor interface RIP version is configured, the interface sends RIPv1 broadcasts and

can receive RIPv1 broadcast and unicast packets, and RIPv2 broadcast, multicast, and unicast

packets.

If an interface has no RIP version configured, it uses the global RIP version; otherwise it uses the

RIP version configured on it.

With RIPv1 configured, an interface sends RIPv1 broadcasts, and can receive RIPv1 broadcasts

and RIPv1 unicasts.

With RIPv2 configured, a multicast interface sends RIPv2 multicasts and can receive RIPv2

unicasts, broadcasts and multicasts.

With RIPv2 configured, a broadcast interface sends RIPv2 broadcasts and can receive RIPv1

unicasts, and broadcasts, and RIPv2 broadcasts, multicasts and unicasts.

Follow these steps to configure a RIP version:

To do…

Use the command…

Remarks

Enter system view

system-view

––

Enter RIP view

rip [ process-id ]
[ vpn-instance
vpn-instance-name ]

––

Specify a global RIP version

version { 1 | 2 }

Optional

By default, if an interface has a
RIP version specified, the
version takes precedence over
the global one. If no RIP
version is specified for an
interface, the interface can
send RIPv1 broadcasts, and
receive RIPv1 broadcasts,
unicasts, RIPv2 broadcasts,
multicasts and unicasts.

Return to system view

quit

—

Enter interface view

interface interface-type
interface-number

––

Specify a RIP version for the
interface

rip version { 1 | 2 [ broadcast |
multicast ] }

Optional

Configuring RIP Route Control

In complex networks, you need to configure advanced RIP features.

This section covers the following topics: