3com S7906E 참조 가이드

 

1-10 

Use the ipv6 maximum load-balancing command to configure the maximum number of equal-cost 

routes for load balancing. 

Use the undo ipv6 maximum load-balancing command to restore the default.  

 

Configure the maximum number of equivalent load-balanced routes according to the memory capacity.  

 

# Configure the maximum number of equivalent load-balanced routing as 2.  

<Sysname> system-view 

[Sysname] isis 100 

[Sysname-isis-100] ipv6 maximum load-balancing 2 

ipv6 preference { preference | route-policy route-policy-name } * 

undo ipv6 preference 

IS-IS view 

2: System level 

preference: Preference for IPv6 IS-IS, ranging from 1 to 255.  

route-policy-name: Name of a routing policy, a string of 1 to 19 characters.  

Use the ipv6 preference command to configure the preference for IPv6 IS-IS protocol.  

Use the undo ipv6 preference command to configure the default preference for IPv6 IS-IS protocol.  

The default preference is 15. 

When a router runs multiple dynamic routing protocols at the same time, the system will assign a 

preference to each routing protocol. If several protocols find routes to the same destination, the route 

found by the protocol with the highest preference is selected. 

# Configure the preference of IPv6 IS-IS protocol as 20.  

<Sysname> system-view