3com S7906E 참조 가이드

 

1-22 

None 

Use the display bgp ipv6 routing-table statistic command to display IPv6 BGP routing statistics. 

# Display IPv6 BGP routing statistics. 

<Sysname> display bgp ipv6 routing-table statistic 

 

 Total Number of Routes: 1 

filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol  process-id ] 

undo filter-policy export [ protocol process-id ] 

IPv6 address family view 

2: System level 

acl6-number: Specifies the number of an ACL6 used to match against the destination of routing 

information. The number is in the range 2000 to 3999. 

ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against the destination of 

routing information. The name is a string of 1 to 19 characters. 

protocol: Filters routes redistributed from the routing protocol. It can be direct, isisv6, ospfv3, ripng, or 

static at present. If no protocol is specified, all routes will be filtered when advertised. 

process-id: Process ID of the routing protocol, in the range 1 to 65535. It is available only when the 

protocol is isisv6, ospfv3 or ripng. 

Use the filter-policy export command to filter outbound routes using a specified filter.  

Use the undo filter-policy export command to cancel filtering outbound routes. 

By default, no outbound routing information is filtered. 

If a protocol is specified, only routes redistributed from the specified protocol are filtered. If no protocol is 

specified, all redistributed routes will be filtered. 

# Reference ACL6 2001 to filter all outbound IPv6 BGP routes. 

<Sysname> system-view 

[Sysname] bgp 100