3com S7906E 참조 가이드

 

1-39 

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of a peer. 

Use the peer next-hop-local command to configure the next hop of routes advertised to a peer/peer 

group as the local router.  

Use the undo peer next-hop-local command to restore the default. 

By default, the system sets the next hop of routes advertised to an EBGP peer/peer group to the local 

router, but does not set for routes outgoing to an IBGP peer/peer group. 

# Set the next hop of routes advertised to IBGP peer group test to the router itself. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] group test internal 

[Sysname-bgp-af-ipv6] peer test next-hop-local 

peer { ipv6-group-name | ipv6-address } preferred-value value 

undo peer { ipv6-group-name | ipv6-address } preferred-value 

IPv6 address family view 

2: System level 

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of a peer. 

value: Preferred value, in the range 0 to 65535. 

Use the peer preferred-value command to assign a preferred value to routes received from a peer or 

peer group. 

Use the undo peer preferred-value command to restore the default.  

By default, routes received from a peer or peer group have a preferred value of 0.  

Routes learned from peers each have an initial preferred value. Among multiple routes to the same 

destination, the route with the biggest value is selected. 

Note that: