3com S7906E 참조 가이드

 

1-45 

peer { ipv6-group-name | ipv6-address } timer keepalive keepalive hold holdtime 

undo peer { ipv6-group-name | ipv6-address } timer 

IPv6 address family view 

2: System level 

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of a peer. 

keepalive: Specifies the keepalive interval in seconds, ranging from 1 to 21845. 

holdtime: Specifies the holdtime in seconds, ranging from 3 to 65535. 

Use the peer timer command to configure keepalive interval and holdtime interval for a peer or peer 

group.  

Use the undo peer timer command to restore the default. 

keepalive interval defaults to 60 seconds, and holdtime interval defaults to 180 seconds 

Note that:  

z 

The timer configured with this command is preferred to the timer configured with the timer 

command.  

z 

The holdtime interval must be at least three times the keepalive interval.  

Related commands: timer. 

# Configure the keepalive interval and holdtime interval for the peer group test as 60 seconds and 180 

seconds. 

<Sysname] system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] group test external 

[Sysname-bgp-af-ipv6] peer test timer keepalive 60 hold 180 

preference { external-preference internal-preference local-preference | 

route-policy 

route-policy-name }