3com S7906E 참조 가이드

 

1-25 

Use the undo if-match ip command to remove the match criterion.  

The match criterion is not configured by default.  

Related commands: route-policy. 

# Configure node 10 of route policy policy1 to permit routing information whose next hop address 

matches IP prefix list p1. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10  

[Sysname-route-policy] if-match ip next-hop ip-prefix p1 

if-match ip-prefix ip-prefix-name 

undo if-match ip-prefix 

Route policy view 

2: System level 

ip-prefix-name: Matches an IP prefix list with a name being a string of 1 to 19 characters.  

Use the if-match ip-prefix command to configure an IP prefix list based match criterion.  

Use the undo if-match ip-prefix command to remove the match criterion.  

No IP prefix list based match criterion is configured by default.  

Related commands: if-match interface,  if-match ip next-hop,  if-match cost,  if-match tag, 

route-policy, apply ip-address next-hop, apply cost, apply local-preference, apply origin, apply 

tag.  

# Configure node 10 of route policy policy2 to permit routes whose destination address matches IP 

prefix list p1. 

<Sysname> system-view 

[Sysname] route-policy policy2 permit node 10  

[Sysname-route-policy] if-match ip-prefix p1 

ip ip-prefix  ip-prefix-name [ index  index-number ] { permit | deny }  ip-address mask-length 

[ greater-equal min-mask-length ] [ less-equal max-mask-length ]