3com S7906E 참조 가이드

 

1-6 

z 

If neither all-instance nor vpn-instance is specified, this command displays the information on the 

public instance. 

z 

Multicast routing tables are the basis of multicast forwarding. You can view the establishment state 

of an (S, G) entry by checking the multicast routing table.  

Related commands: display multicast forwarding-table.  

# View the routing information in the multicast routing table of the public instance.  

<Sysname> display multicast routing-table 

Multicast routing table of VPN-Instance: public net 

 Total 1 entry 

 00001. (172.168.0.2, 227.0.0.1) 

       Uptime: 00:00:28 

       Upstream Interface: Vlan-interface1 

       List of 2 downstream interfaces 

           1:  Vlan-interface2 

           2:  Vlan-interface3 

Table 1-4 display multicast routing-table command output description 

Multicast routing table of VPN-Instance: public 
net 

Multicast routing table for the public network  

Total 1 entry 

Total number of (S, G) entries in the multicast 
routing table 

00001 

Sequence number of the (S, G) entry  

(172.168.0.2, 227.0.0.1) 

An (S, G) entry of the multicast forwarding table 

Uptime 

Length of time for which the (S, G) entry has 
been up, in hours:minutes:seconds  

Upstream interface 

Upstream interface the (S, G) entry: multicast 
packets should arrive at this interface  

List of 2 downstream interfaces 

Downstream interface list: these interfaces need 
to forward multicast packets  

 

display multicast routing-table [ all-instance | vpn-instance vpn-instance-name ] static [ config ] 

[ source-address { mask-length | mask } ] 

Any view 

1: Monitor level