3com S7906E 참조 가이드

 

1-51 

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] state-refresh-interval 70 

state-refresh-rate-limit interval 

Public instance PIM view, VPN instance PIM view 

2: System level 

interval: Time to wait before receiving a new refresh message, in seconds and with an effective range of 

1 to 65535.  

Use the state-refresh-rate-limit command to configure the time the router must wait before receiving a 

new state refresh message.  

Use the undo state-refresh-rate-limit command to restore the system default.  

By default, the device waits 30 seconds before receiving a new state refresh message.  

Related commands: pim state-refresh-capable, state-refresh-interval, state-refresh-ttl.  

# In the public instance configure the device to wait 45 seconds before receiving a new state refresh 

message.  

<Sysname> system-view 

[Sysname] pim 

[Sysname-pim] state-refresh-rate-limit 45 

state-refresh-ttl ttl-value 

Public instance PIM view, VPN instance PIM view 

2: System level