3com S7906E 참조 가이드

1-33

Examples

# In IPv4 MBGP address family view, advertise the community attribute to the existing peer group test.

<Sysname> system-view

[Sysname]bgp 100

[Sysname-bgp]group test external

[Sysname-bgp]peer test as-number 200

[Sysname-bgp]ipv4-family multicast

[Sysname-bgp-af-mul] peer test enable

[Sysname-bgp-af-mul] peer test advertise-community

peer advertise-ext-community (MBGP family view)

Syntax

peer { group-name | ip-address } advertise-ext-community

undo peer { group-name | ip-address } advertise-ext-community

View

IPv4 MBGP address family view

Default Level

2: System level

Parameters

group-name: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.

ip-address: IP address of an IPv4 MBGP peer.

Description

Use the peer advertise-ext-community command to advertise the extended community attribute to a

peer/peer group.

Use the undo peer advertise-ext-community command to disable the extended community attribute

advertisement to a peer/peer group.

By default, no extended community attribute is advertised to a peer/peer group.

For related information, refer to the ip extcommunity-list, if-match extcommunity and apply

extcommunity commands in Route policy Commands of the IP Routing Volume.