3com S7906E 참조 가이드

 

1-9 

[Sysname] interface bridge-aggregation 1 

[Sysname-Bridge-Aggregation1] enable snmp trap updown 

interface bridge-aggregation interface-number 

undo interface bridge-aggregation interface-number 

System view 

2: System level 

interface-number: Layer-2 aggregate interface number. The value range is 1 to 1,024..  

Use the interface bridge-aggregation command to create a Layer-2 aggregate interface and enter the 

Layer-2 aggregate interface view.  

Use the undo interface bridge-aggregation command to remove a Layer-2 aggregate interface.  

Upon creation of a Layer-2 aggregate interface, a Layer-2 aggregation group numbered the same is 

created automatically. Removing the Layer-2 aggregate interface also removes the Layer-2 

aggregation group. At the same time, the member ports of the aggregation group, if any, leave the 

aggregation group.  

# Create Layer-2 aggregate interface Bridge-aggregation 1.  

<Sysname> system-view 

[Sysname] interface bridge-aggregation 1 

[Sysname-Bridge-Aggregation1] 

lacp port-priority port-priority 

undo lacp port-priority 

Ethernet interface view 

2: System level