3com S7906E 참조 가이드

 

1-4 

Subvlan flags: R-Real VLAN, C-Copy VLAN 

Sub-VLAN flag: R stands for real egress 
sub-VLAN under the current entry, and C for 
sub-VLAN copied from a (*, G) entry to an (S, G) 
entry. 

Router port(s) 

Number of router ports 

( 00:01:30 ) 

Remaining time of dynamic member port or 
router port aging timer. On a distributed device, 
to get this time value of a non-aggregation port 
on a board other than the main processing unit, 
you must specify the number of the slot where 
the corresponding board resides by using slot 
slot-number. This is not required for an 
aggregation port.  

IP group address 

Address of an IPv6 multicast group 

MAC group address 

Address of a MAC multicast group 

Attribute 

Attribute of an IPv6 multicast group 

Host port(s) 

Number of member ports 

 

display mld interface [ interface-type interface-number ] [ verbose ] 

Any view 

1: Monitor level 

interface-type interface-number: Specifies an interface by its type and number. If you do not specify an 

interface, this command will display the information of all interfaces running MLD. 

verbose: Displays detailed MLD configuration and operation information. 

Use the display mld interface command to view MLD configuration and operation information on the 

specified interface or all MLD-enabled interfaces. 

# View the detailed MLD configuration and operation information on Vlan-interface 1. 

<Sysname> display mld interface vlan-interface 1 verbose 

 Vlan-interface1(FE80::200:AFF:FE01:101): 

   MLD is enabled 

   Current MLD version is 2 

   Value of query interval for MLD(in seconds): 125