3com S7906E 참조 가이드

 

1-45 

IPv6 PIM view 

2: System level 

acl6-number: Basic IPv6 ACL number, in the range of 2000 to 2999.  

Use the ssm-policy command to configure the IPv6 SSM group range.  

Use the undo ssm-policy command to restore the system default.  

By default, the IPv6 SSM group range is FF3x::/32. Here x refers to any legal scope. 

This command allows you to define an address range of permitted or denied IPv6 multicast groups. If 

the match succeeds, the running multicast mode will be IPv6 PIM-SSM; otherwise the multicast mode 

will be IPv6 PIM-SM.  

# Configure the IPv6 SSM group range to be FF3E:0:8192::/96.  

<Sysname> system-view 

[Sysname] acl ipv6 number 2000 

[Sysname-acl6-basic-2000] rule permit source ff3e:0:8192:: 96 

[Sysname-acl6-basic-2000] quit 

[Sysname] pim ipv6 

[Sysname-pim6] ssm-policy 2000 

state-refresh-hoplimit hoplimit-value 

IPv6 PIM view 

2: System level 

hoplimit-value: Hop limit value of state refresh messages, in the range of 1 to 255.  

Use the state-refresh-hoplimit command to configure the hop limit value of state refresh messages.  

Use the undo state-refresh-hoplimit command to restore the system default.  

By default, the hop limit value of state refresh messages is 255.