3com S7906E 참조 가이드

 

1-3 

After the bestroute compare-med command is used, the balance command will not take effect. 

 

# In IPv6 MBGP address family view, enable the comparison of MED for paths from each AS during best 

route selection. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp]ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul] bestroute compare-med 

bestroute med-confederation 

undo bestroute med-confederation 

IPv6 MBGP address family view 

2: System level 

None 

Use the bestroute med-confederation command to enable the comparison of the MED for paths from 

confederation peers during best route selection.  

Use the undo bestroute med-confederation command to disable the comparison. 

Such comparison is disabled by default. 

With this command used, the system only compares MED values for paths from peers within the 

confederation. Paths from external ASs are advertised throughout the confederation without MED 

comparison. 

# In IPv6 MBGP address family view, enable the comparison of the MED for paths from peers within the 

confederation. 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp]ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul]bestroute med-confederation