3com S7906E 참조 가이드

 

1-6 

None 

Use the dldp enable command to enable DLDP. 

Use the undo dldp enable command to disable DLDP. 

When executed in system view, these two commands enables/disables DLDP globally; when executed 

in Ethernet port view, these two commands enables/disables DLDP on the current port; when executed 

in port group view, these two commands enables/disables DLDP on all the ports in the port group. 

By default, DLDP is disabled globally or on a port. 

 

z 

These two commands are applicable to Layer 2 Ethernet ports, including optical ports and 

electrical ports.  

z 

DLDP can take effect only when it is enabled both globally and on a port. 

 

# Enable DLDP globally. 

<Sysname> system-view 

[Sysname] dldp enable 

# Enable DLDP on GigabitEthernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] dldp enable 

# Enable DLDP for all the ports in port group 1. 

<Sysname> system-view 

[Sysname] port-group manual 1 

[Sysname-port-group-manual-1] group-member GigabitEthernet 2/0/1 to GigabitEthernet 2/0/3 

[Sysname-port-group-manual-1] dldp enable 

dldp interval time 

System view 

2: System level