3com S7906E 참조 가이드

 

1-2 

   subvlan list: 

    no subvlan 

   port list: 

    no port 

Table 1-1 display multicast-vlan ipv6 command output description 

Total 4 IPv6 multicast-vlan(s) 

Total number of IPv6 multicast VLANs 

IPv6 Multicast vlan 

An IPv6 multicast VLAN 

subvlan list 

List of sub-VLANs of the IPv6 multicast VLAN 

port list 

Port list of the IPv6 multicast VLAN 

 

multicast-vlan ipv6 vlan-id 

undo multicast-vlan ipv6 { all | vlan-id } 

System view 

2: System level 

vlan-id: Specifies a VLAN by its ID, in the range of 1 to 4094.  

all: Deletes all IPv6 multicast VLANs. 

Use the multicast-vlan ipv6 command to configure the specified VLAN as an IPv6 multicast VLAN and 

enter IPv6 multicast VLAN view.  

Use the undo multicast-vlan ipv6 command to remove the specified VLAN as an IPv6 multicast 

VLAN. 

No VLAN is an IPv6 multicast VLAN by default.  

Note that:  

z 

The specified VLAN to be configured as an IPv6 multicast VLAN must exist.  

z 

The IPv6 multicast VLAN feature cannot be enabled on a device with IPv6 multicast routing 

enabled.  

z 

For a sub-VLAN-based IPv6 multicast VLAN, you need to enable MLD Snooping only in the IPv6 

multicast VLAN; for a port-based IPv6 multicast VLAN, you need to enable MLD Snooping in both 

the IPv6 multicast VLAN and all the user VLANs.