3com S7906E 참조 가이드
1-20
Out-Interface : Vlan-interface1
NextHop : 30.1.1.2
Static-Lsp Type: IPTN
Lsp Status : Up
Table 1-11 display mpls static-lsp verbose command output description
Field
Description
LSR-Type
Role of the LSR for the LSP, which can be ingress, egress, or transit
Static-Lsp Type
Type of the static LSP
display mpls statistics interface
Syntax
display mpls statistics interface { interface-type interface-number | all }
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
all: Specifies all interfaces.
Description
Use the display mpls statistics interface command to display MPLS statistics for one or all interfaces.
Note that:
To display statistics on a device, set the statistics interval first. By default, the interval is 0 and the
system does not collect MPLS statistics. In this case, the value of every statistic is 0.
Related commands: statistics interval, mpls statistics enable.
Examples
# Display MPLS statistics for all interfaces.
<Sysname> display mpls statistics interface all
Statistics for Interface IN :
Incoming Interface Vlan-interface1
Octets : 0
Packets : 0
Errors : 0
Disables : 0
Failed Label Lookup : 0
Start Time : 2008/04/28 10:23:55
End Time : 2008/04/28 10:23:55
Statistics for Interface OUT :