3com S7906E 참조 가이드

 

1-28 

OSPF view 

2: System level 

domain-id: OSPF domain ID, in integer or dotted decimal notation. If it is in integer, it ranges from 0 to 

4,294,967,295. 

secondary: Uses the domain ID as secondary. With this keyword not specified, the domain ID 

configured is primary. 

Use the domain-id command to configure an OSPF domain ID. 

Use the undo domain-id command to restore the default. 

By default, the OSPF domain ID is 0. 

With no parameter specified, the undo domain-id command deletes all domain IDs. 

Usually, routes injected from PEs are advertised as External-LSAs. However, routes to different 

destinations in the same OSPF domain must be advertised as Type-3 LSAs. Therefore, using the same 

domain ID for an OSPF domain is required. 

# Configure the OSPF domain ID. 

<Sysname> system-view 

[Sysname] ospf 100 

[Sysname-ospf-100] domain-id 234 

export route-policy route-policy 

VPN instance view 

2: System level 

route-policy: Name of the export routing policy for the VPN instance, a string of 1 to 19 characters. 

Use the export route-policy command to apply an export routing policy to a VPN instance. 

Use the undo export route-policy command to remove the application.