3com S7906E 참조 가이드

 

2-7 

Any view 

2: System level 

radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 

to 32 characters.  

session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50 characters. 

time-range start-time stop-time: Specifies a time range by its start time and end time in the format of 

hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd. 

user-name user-name: Specifies a user by the user name, which is a case-sensitive string of 1 to 80 

characters. The format of the user-name argument (for example, whether the domain name should be 

included) must comply with that specified for usernames to be sent to the RADIUS server in the 

RADIUS scheme. 

slot slot-number: Specifies the slot where the interface card is inserted. 

Use the display stop-accounting-buffer command to display information about the stop-accounting 

requests buffered in the device by scheme, session ID, time range, user name, or slot. 

Note that if receiving no response after sending a stop-accounting request to a RADIUS server, the 

device buffers the request and retransmits it. You can use the retry stop-accounting command to set 

the number of allowed transmission attempts. 

Related commands: reset stop-accounting-buffer, 

stop-accounting-buffer enable, 

user-name-format, retry stop-accounting. 

# Display information about the buffered stop-accounting requests on the interface board in slot 1 from 

0:0:0 to 23:59:59 on August 31, 2006. 

<Sysname> display stop-accounting-buffer time-range 0:0:0-08/31/2006 23:59:59-08/31/2006 

slot 1 

 Slot 1 

Total 0 record(s) Matched 

key { accounting | authentication } string 

undo key { accounting | authentication } 

RADIUS scheme view