3com S7906E 참조 가이드

 

1-10 

undo dot1x max-user 

System view, Ethernet interface view 

2: System level 

user-number: Maximum number of users to be supported simultaneously, in the range 1 to 1024. 

interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The 

interface-list argument is in the format of interface-list = { interface-type  interface-number [ to 

interface-type  interface-number ] } & <1-10>, where interface-type represents the port type, 

interface-number represents the port number, and & <1-10> means that you can provide up to 10 port 

indexes/port index lists for this argument. The start port number must be smaller than the end number 

and the two ports must be of the same type. 

Use the dot1x  max-user command to set the maximum number of users to be supported 

simultaneously for specified or all ports. 

Use the undo dot1x max-user command to restore the default. 

With no interface specified, the command sets the threshold for all ports. 

Related commands: display dot1x. 

# Set the maximum number of users for port GigabitEthernet 2/0/1 to support simultaneously as 32. 

<Sysname> system-view 

[Sysname] dot1x max-user 32 interface GigabitEthernet 2/0/1 

Or 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] dot1x max-user 32 

dot1x multicast-trigger 

undo dot1x multicast-trigger 

Interface view 

2: System level