3com S7906E 참조 가이드

 

1-20 

# Configure the encapsulation format for LLDPDUs as SNAP on GigabitEthernet 2/0/3. 

<Sysname> system-view 

[Sysname] interface gigabitethernet2/0/3 

[Sysname-GigabitEthernet2/0/3] lldp encapsulation snap 

lldp fast-count value 

undo lldp fast-count 

System view 

2: System level 

value: Number of the LLDPDUs to be sent successively when a new neighboring device is detected. 

This argument ranges from 1 to 10. 

Use the lldp fast-count command to set the number of the LLDPDUs to be sent successively when a 

new neighboring device is detected. 

Use the undo lldp fast-count command to restore the default. 

By default, the number is 3. 

# Configure to send four LLDP successively when a new neighboring device is detected. 

<Sysname> system-view 

[Sysname] lldp fast-count 4 

lldp hold-multiplier value 

undo lldp hold-multiplier 

System view 

2: System level