3com S7906E 참조 가이드

 

1-19 

z 

System level: Commands of this level are used to configure services. Commands concerning 

routing and network layers are of system level. You can utilize network services by using these 

commands. 

z 

Manage level: Commands of this level are for the operation of the entire system and the system 

supporting modules. Services are supported by these commands. Commands concerning file 

system, file transfer protocol (FTP), trivial file transfer protocol (TFTP), downloading using 

XModem, user management, and level setting are of administration level. 

# Configure commands of level 0 are available to the users logging in using the user name of zbr. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] local-user zbr 

[Sysname-luser-zbr] service-type telnet level 0 

# To verify the above configuration, you can quit the system, log in again using the user name of zbr, 

and then list the available commands, as listed in the following. 

[Sysname] quit 

<Sysname> ?  

User view commands: 

  ping             Ping function 

  quit             Exit from current command view 

  super            Set the current user priority level 

  telnet           Establish one TELNET connection 

  tracert          Trace route function 

  undo             Undo a command or set to its default status 

set authentication password { cipher | simple } password 

User interface view 

3: Manage level 

cipher: Specifies to display the local password in encrypted text when you display the current 

configuration. 

simple: Specifies to display the local password in plain text when you display the current configuration. 

password: Password. The password must be in plain text if you specify the simple keyword in the set 

authentication password command. If you specify the cipher keyword, the password can be in either 

encrypted text or plain text. Whether the password is in encrypted text or plain text depends on the 

password string entered. Strings containing up to 16 characters (such as 123) are regarded as plain text