3com S7906E 참조 가이드
1-32
nSRPU model
Current traffic forwarding
mode of the SRPU
Default working mode of EA
LPUs
l2-enhanced or
standard-bridging
standard-bridging
bridging
LSQ1SRP1CB
standard-routing
routing
z
When the SRPU of the S7900E switch is LSQ1SRP1CB, it is recommended not to modify the
default working mode the EA LPUs.
z
When the SRPU of the S7900E switch is LSQ1SRP2XB, LSQ1SRPB, or LSQ1MPUA, if an EA
LPU is connected to a Layer 2 forwarding network with a large number of MAC addresses, you can
configure the EA LPU to work in the MAC extension mode.
z
To make the configured working mode take effect, you need to save the configuration and restart
the switch.
Examples
# Configure the working mode of the EA LPU on slot 2 of the S7902E switch as the MAC extension
mode.
<Sysname> system-view
[Sysname] switch-mode bridging slot 2
# Restore the default working mode of the EA LPU on slot 2 of the S7902E switch.
<Sysname> system-view
[Sysname] undo switch-mode slot 2
temperature-limit
Syntax
temperature-limit slot-number lower-value upper-value
undo temperature-limit slot-number
View
System view
Default Level
2: System level
Parameters
slot-number: Slot number.
lower-value: Lower temperature limit in Celsius degrees, in the range 0°C to 70°C (32°F to 158°F).
upper-value: Upper temperature limit in Celsius degrees, in the range 20°C to 90°C (68°F to
194°F).Description