3com S7906E 참조 가이드

 

1-19 

# Display the startup configuration file used at the current system startup and the one to be used at the 

next system startup. 

<Sysname> display startup 

MainBoard: 

  Current startup saved-configuration file:          flash:/testcfg.cfg 

  Next startup saved-configuration file:             flash:/testcfg.cfg 

  Bootrom-access enable state:                       enabled 

Table 1-2 display startup command output description 

Current Startup saved-configuration file 

The configuration file used for the current startup

Next startup saved-configuration file 

The configuration file used for the next startup 

 

reset saved-configuration  

User view 

2: System level 

None 

Use the reset saved-configuration command to delete the startup configuration file saved on the 

storage medium of the device. 

Note that: 

This command will permanently delete the configuration file from the device. Use it with caution.  

Related commands: save, display saved-configuration. 

# Delete the currently running configuration file from the storage medium of the device.  

<Sysname> reset saved-configuration 

The saved configuration will be erased. 

Are you sure? [Y/N]:y 

Configuration in the device is being cleared. 

Please wait ....... 

Configuration in the device is cleared.