3com S7906E 참조 가이드

 

1-22 

System view 

2: System level 

None 

Use the slave auto-update config command to enable the configuration file auto-save function. After 

the function is enabled, when you configure to save the current configuration on the AMB, the SMB 

automatically saves the current configuration to its configuration file. 

Use the undo slave auto-update config command to disable the function. 

By default, the configuration file auto-save function is enabled. 

# Enable the configuration file auto-save function. 

<Sysname> system-view 

[Sysname] slave auto-update config 

startup saved-configuration cfgfile  

undo startup saved-configuration 

User view 

2: System level 

cfgfile: Configuration file name. 

Use the startup saved-configuration command to specify a startup configuration file (the 

configuration file to be used at the next system startup). 

Use the undo startup saved-configuration command to configure the system to start up with the null 

configuration, that is, the factory configuration. 

The specified file must be ended with a .cfg extension and saved in the root directory of the storage 

device. 

Related commands: display startup.