3com S7906E 참조 가이드

 

1-2 

Table 1-1 display snmp-agent community command output description 

Community name 

Community name 

z 

If a community name is created by using the snmp-agent 
community command, the community name will be displayed. 

z 

If a community name is created by using the snmp-agent usm-user 
{ v1 | v2c } command, the user name will be displayed. 

Group name 

SNMP group name 

z 

If a community name is created by using the snmp-agent 
community command, the group name  and the community name 
are the same, which means the community name will be displayed.

z 

If a community name is created by using the snmp-agent usm-user 
{ v1 | v2c } command, the name of the group to which the user 
belongs will be displayed. 

Acl 

The number of the ACL in use 

After an ACL is configured, only the Network Management Station 
(NMS) with the IP address that matches the ACL rule can access the 
device. 

Storage-type 

Storage type, which could be: 

z 

volatile: Information will be lost if the system is rebooted 

z 

nonVolatile: Information will not be lost if the system is rebooted 

z 

permanent: Information will not be lost if the system is rebooted. 
Modification is permitted, but deletion is forbidden 

z 

readOnly: Information will not be lost if the system is rebooted. 
Read only, that is, no modification, no deletion 

z 

other: Other storage types 

 

display snmp-agent group [ group-name ] 

Any view 

1: Monitor level 

group-name: Specifies the SNMP group name, a string of 1 to 32 characters, case sensitive. 

Use the display snmp-agent group command to display information for the SNMP agent group, 

including group name, security model, MIB view, storage type, and so on. Absence of the group-name 

parameter indicates that information for all groups will be displayed. 

# Display the information of all SNMP agent groups.