3com S7906E 참조 가이드
1-22
a target host, enabling the device to send trap messages to different NMSs. The number of target hosts
that can be configured varies with the device model.
z
If udp-port port-number is not specified, port number 162 is used.
z
If the key words v1, v2 and v3 are not specified, v1 is used.
z
If the key words authentication and privacy are not specified, the authentication mode is no
authentication, no privacy.
Related commands: enable snmp trap updown, snmp-agent trap enable, snmp-agent trap source,
snmp-agent trap life.
Examples
# Enable the device to send SNMP traps to 10.1.1.1, using the community name of public.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname public
# Enable the device to send SNMP traps to the device which is in VPN 1 and has an IP address of
10.1.1.1, using the community name of public.
<Sysname> system-view
[Sysname] snmp-agent trap enable standard
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 vpn-instance vpn1 params
securityname public
snmp-agent trap enable
Syntax
snmp-agent trap enable [ bgp | configuration | flash | mpls | ospf [ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow | lsdboverflow |
maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt |
virifstatechange | viriftxretransmit | virnbrstatechange ] * | standard [ authentication | coldstart |
linkdown | linkup | warmstart ]* | system | vrrp [ authfailure | newmaster ] ]
undo snmp-agent trap enable [ bgp | configuration | flash | mpls | ospf [ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow | lsdboverflow |
maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt |
virifstatechange | viriftxretransmit | virnbrstatechange ] * | standard [ authentication | coldstart |
linkdown | linkup | warmstart ]* | system | vrrp [ authfailure | newmaster ] ]
View
System view
Default Level
3: Manage level
Parameters
bgp: Enables the sending of traps of the BGP module.
configuration: Enables the sending of configuration traps.
flash: Enables the sending of FLASH-related traps.