3com S7906E 참조 가이드

 

1-25 

# Configure the system to output information to the trap buffer through the default channel, and set the 

trap buffer size to 30. 

<Sysname> system-view 

[Sysname] info-center trapbuffer size 30 

logfile save 

Any view 

2: System level 

None 

Use the logfile save command to save all the contents in the logfile buffer into the log file. 

By default, the system automatically saves the log file based on a frequency configured by the 

info-center logfile frequency command into a directory configured by the info-center logfile 

switch-directory command. 

Note that all contents in the logfile buffer will be cleared after they are successfully saved into the log file 

automatically or manually. 

 

By default, the log file is automatically saved to the logfile directory under root directory of the CF card 

(cf:/logfile). If there is no CF card, you can use the info-center logfile switch-directory command to 

configure the directory where a log file is saved, otherwise, the system will prompt you that the save 

operation failed. 

 

# Save the contents in the logfile buffer into the log file. 

<Sysname> logfile save