3com S7906E 참조 가이드

 

1-4 

destination port port-number 

undo destination port 

TCP, UDP-echo, UDP-jitter test type view 

2: System level 

port-number: Destination port number of a test operation, in the range 1 to 65535. 

Use the destination port command to configure a destination port number for a test operation. 

Use the undo destination port command to remove the configured destination port number. 

By default, no destination port number is configured for a test operation. 

Note that you are not recommended to perform a UDP-jitter test on ports from 1 to 1023 (known ports). 

Otherwise, the NQA test will fail or the corresponding services of this port will be unavailable. 

# Configure the destination port number of a test operation as 9000. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type udp-echo 

[Sysname-nqa-admin-test-udp-echo] destination port 9000 

display nqa { result | history } [ admin-name operation-tag ] 

Any view 

2: System level 

result: Displays the results of the last test. 

history: Displays the history records of a test. 

admin-name: Specifies the name of the administrator who creates NQA operations, a string of 1 to 32 

characters. It is case-insensitive.