3com S7906E 참조 가이드

 

1-24 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type icmp-echo 

[Sysname-nqa-admin-test-icmp-echo] source ip 10.1.1.1 

source port port-number 

undo source port 

SNMP, UDP-echo, UDP-jitter test type view 

2: System level 

port-number: Source port number for a test operation, in the range 1 to 50000. 

Use the source port command to configure the source port of ICMP probe requests in a test operation. 

Use the undo source port command to remove the configured port number. 

By default, no source port number is specified. 

# Configure the source port number of a probe request as 8000. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type udp-echo 

[Sysname-nqa-admin-test-udp-echo] source port 8000 

tos value 

undo tos 

DLSw, FTP, HTTP, ICMP-echo, SNMP, TCP, UDP-echo, UDP-jitter test type view 

2: System level 

value: Value of the ToS field in the IP header in an NQA probe packet, in the range 0 to 255.