3com S7906E 참조 가이드
1-2
View
System view
Default Level
2: System level
Parameters
None
Description
Use the slave restart command to manually configure the SMB to restart.
When the backup system program operates abnormally and needs to be reloaded, you can manually
restart the SMB.
Examples
# Restart the SMB.
<Sysname> system-view
[Sysname] slave restart
The slave will reset! Continue?[Y/N]:y
slave switchover
Syntax
slave switchover
View
System view
Default Level
2: System level
Parameters
None
Description
Use the slave switchover command to manually configure the switchover between the AMB and SMB.
Related commands: slave switchover { disable | enable }.
Examples
# Manually configure the switchover between the AMB and the SMB.
<Sysname> system-view
[Sysname] slave switchover
Caution!!! Confirm switch slave to master?[Y/N] y
Starting.....
RAM Line....OK